Table of Contents
Advertisement
8.
Press the N key. A:\> prompt appears.
9.
Type PHDISK /DELETE /PARTITION and press Enter.
Deleting the partition that contains current files
Following the above steps,
1.
Type FDISK and press Enter.
2.
Select 3. Delete partition or Logical DOS Drive and press Enter.
3.
Select 1. Delete Primary DOS Partition and press Enter.
4.
Press the Enter key, input the volume label and press the Enter key again.
5.
Press the Y key and then the Enter key.
6.
Press the Esc key twice.
7.
Press the Ctrl+Alt+Del keys simultaneously to restart the system.
8.
Press the N key.
Creating the new suspend-to-disk partition
At the A:\> prompt, type PHDISK /CREATE /PARTITION and press Enter.
Creating the new suspend-to-disk partition
The size of the suspend-to-disk partition is automatically defined as the
total of the current memory size and extra 4 MB. If expanding the
memory size after creating the suspend-to-disk partition, you should
recreate the partition to renew its size.
Restoring the System
1.
Re-install Windows 95, consulting Re-installation Instructions.
2.
Restore the backup data according to Windows Help.
3.
On the Main page of Setup Utility, set Boot Sequence back to C: Then A:.
4.
On the Security page, set Hard disk boot sector back to Write protect.
A-6 Suspend-to-Disk Partition
Advertisement
Table of Contents
