Table of Contents
Advertisement
Enabling or Disabling Windows 95 IrDA Communication
Windows 95 IrDA communication is disabled by default. To enable it,
1.
From the Start menu, select Settings - Control Panel.
2.
Double-click Infrared.
3.
Select Options.
4.
Check the item of Enable infrared communication on.
5.
Click OK.
Using Communication Applications in Windows 95
Your notebook assigns the physical IR port to COM2 while Windows 95 assigns the
logical IR port to COM4 as default. To use Windows 95 communication applications
such as the Direct Cable Connection, you need to select COM4 for the logical IR
port in the application. Refer to Windows Help for details.
When Performing Infrared Communication
5
If you use a communications application to perform infrared communications, be
sure to use the Setup Utility to disable the Power Management setting.
Do not enter Suspend Mode during the communication session.
Data communication may not function correctly if the power
management is active during the communication session.
5-2 Infrared Communication
Advertisement
Table of Contents
