Sharp PC-W100T Operation Manual page 89

Suspend-to-Disk Partition
The suspend-to-disk partition is an area of the hard disk reserved for the suspend-to-
disk operation. When suspend-to-disk operation activates, information in the
memory is saved in this area and restored into the memory when the notebook is
turned on again.
If you change the partition of the hard disk, you must also create the suspend-to-
disk partition again.
Changing the size of the suspend-to-disk partition will destroy data on
the hard disk. Therefore, do not change the partition size unless
necessary.
About the Suspend-to-Disk Partition Size
When you create a suspend-to-disk partition, make it the amount of the memory plus
4MB. The extra 4MB allows for the overhead of the program and data held in video
memory.
When shipped, the notebook comes with 36MB of suspend-to-disk partition.
Use the following table to determine the size of the partition required.
Memory Size
16MB
32MB
A-4 Suspend-to-Disk Partition
Partition Size
20MB (20480KB)
36MB (36864KB)