Base Screen Of Document Filing Mode - Sharp MX-2300N Document Filing Manual

BASE SCREEN OF DOCUMENT FILING
MODE
When the [DOCUMENT FILING] key is pressed on the operation panel, the following screen appears. This screen is
used to call up and use image files saved during copying or scanning.
DOCUMENT
FILING
IMAGE SEND
COPY
(1) [HDD Status] key
Touch this key to check how much of the machine's hard
drive is being used.
The amount of disk space used is shown in increments of
1%.
HDD Status
Main Folder 50%
0 25 50
Quick File Folder 30%
0 25 50
(2) [Search] key
Touch this key to search for a file stored in a folder.
You can search using the user name, file name, or folder
name.
☞
SEARCHING FOR A STORED FILE
(3) [Scan to HDD] key
Touch this key to select Scan to HDD. Neither printing
nor transmission are performed.
The file will be stored in the Main Folder or a custom
folder.
☞
STORING A DOCUMENT ONLY (Scan to HDD)
(page 17)
File Store
Scan to HDD
(3)
OK
Custom Folder 25%
Free Space:25%
75 100%
Free Space:70%
75 100%
(page 42)
(1)
HDD Status
(4) [External Data Access] key
This can be selected when an FTP server is stored or a
USB memory device is connected to the machine. The
same screen appears if the [DOCUMENT FILING] key is
pressed twice.
☞
"DIRECTLY PRINTING FROM THE MACHINE" in
the Printer Guide
(5) [Quick File Folder] key
Touch this key to call up a file from the Quick File Folder.
When this key is touched, the file selection screen for the
Quick File Folder appears.
☞
SAVING A FILE WITH "Quick File"
(6) [File Folder] key
Touch this key to call up a file from the Main Folder or a
Custom Folder. When this key is touched, the file
selection screen of the Main Folder or one of the Custom
Folders appears.
When user authentication is used and My Folder is
configured, the file selection screen of My Folder will
appear.
☞
SAVING A FILE WITH "File"
10
(2)
Search
File Retrieve
File
Folder
Quick File
Folder
External Data
Access
(4) (5) (6)
(page 11)
(page 13)