Storing A Document Only (Scan To Hdd); Scan To Hdd" Screen; Performing "Scan To Hdd - Sharp MX-2300N Document Filing Manual

STORING A DOCUMENT ONLY (Scan to HDD)

Scan to HDD is used to store the image file of a scanned document in the Main Folder or a Custom Folder. Neither
printing nor transmission are performed.

"Scan to HDD" SCREEN

The following screen appears when the [Scan to HDD] key is touched in the base screen of document filing mode.
Touch the keys described below as needed to select Scan to HDD settings.
DOCUMENT
FILING
Scan to HDD
(1) [Colour Mode] key
Use this key to select the colour mode when storing the
document.
☞
ORIGINAL SETTINGS FOR "Scan to HDD"
19)
(2) [Job Detail Settings] key
Touch this key to select the exposure, resolution, and
compression ratio.
☞
ORIGINAL SETTINGS FOR "Scan to HDD"
19)
(3) [Original] key
Touch this key to set the original size and select
two-sided document scanning. The automatically
detected original size appears in the top half of the
[Original] key.
☞
Selecting the original size and two-sided document
scanning (page 21)

PERFORMING "Scan to HDD"

1
Ready to scan to HDD.
Press [Start] to scan original.
Mono2/Auto
(1)
Colour Mode
Job Detail
(2)
Settings
Auto A4
(3)
Original
(page
(page
(4) [Back] key
Touch this key to return to the base screen of document
filing mode.
(5) [Special Modes] key
Select special modes for Scan to HDD, including erase,
dual page scan, and card shot.
☞
Special modes screen for Scan to HDD
(6) [File Information] key
Touch this key to append information to the file. The
settings are configured in the same way as file
information for "File".
☞
FILE INFORMATION
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
17
(4)
Back
(5)
Special Modes
File
(6)
Information
(page 21)
(page 15)