Caring For Your Vehicle; High Speed Drive - Fisher-Price JEEP AFTERSHOCK 74270 Owner's Manual & Assembly Instructions

Fisher-price motorized toy car user manual
Table of Contents

Advertisement

How to Operate Your Vehicle
Advanced Use - High Speed Drive
Disconnecting High Speed Lock-Out
Lock-Out Screw
• Before you disconnect the high speed lock-out, make
sure your child knows how to steer, how to start and
stop the vehicle and knows the rules for safe driving.
When the high speed lock-out is disconnected, the
vehicle can be driven forward in low speed (2
maximum) or high speed (5 mph, maximum).
• Make sure the shifter is in the reverse (
• Loosen the screw in the shifter box using a Phillips
screwdriver.
• Remove the screw.
• Insert the lock-out screw into the hole in the shifter
handle to keep it for future use. It can be re-inserted into
the shifter box to lock-out high speed.
To Drive
1
Please Note: To avoid damaging the motors and gears,
stop the vehicle before shifting between low and
high speed.
• Make sure the shifter is in the high speed (
• Press down on the foot pedal
forward at a maximum of 5 mph
• Help your child practice steering to learn how far and how
quickly to turn the steering wheel when driving forward in
high speed.
• Make sure your child is comfortable with steering the
vehicle and automatically knows how to stop.
• Stopping in high speed is the same as stopping in low
speed. The vehicle automatically stops when your
child's foot is lifted from the pedal.
Shifter
Storage
Position
Lock-Out
Position
1
/
mph,
2
) position.
3
2
)position
. The vehicle goes
2
.
3
How to Operate Your Vehicle
Time for a Tune-Up!
• To activate pretend engine idle sounds and vibrating
action, press the engine switch on the dash to the
ON position.
• Press the foot pedal half way to the floor to rev the
pretend engine without driving forward.
• To drive forward with pretend engine sound, press the
foot pedal completely to the floor.
• To quiet the pretend engine idle and smooth the
ride, your child can tighten the adjuster bolt on the
engine platform.
• Or, for louder pretend engine idle and increased
vibration, loosen the adjuster bolt in the engine platform.
• Press the engine switch on the dash to OFF to turn the
pretend engine off.
• To complete the tune-up, pop the spark plug wires off
the pretend engine. Twist the spark plugs for more action
sounds!
L
• Check all screws, retainers, and their protective coverings
regularly and tighten as required. Check plastic parts on a
regular basis for cracks or broken pieces.
• During snowy or rainy weather, the vehicle should be
stored inside or under a protective cover. Remember to
charge the batteries at least once per month while your
vehicle is not in regular use.
• Avoid operating the vehicle in wet or snowy conditions
and do not spray the vehicle with a hose. Do not wash the
vehicle with soap and water. Water or moisture in the
motors or electrical switches can cause them to corrode
and could cause switch or motor failure.
• Avoid operating the vehicle on sand, loose dirt or gravel.
Sand, loose dirt or gravel in the motors or electrical
switches can cause them to jam and could cause switch
or motor failure.
• The vehicle can be wiped down with a soft, dry cloth. For
a shiny finish, you can wipe plastic parts with a non-wax
.
furniture polish applied to a soft-cloth. Do not use
1
automotive wax. Do not use soap and water or spray the
vehicle with a hose.
• To ensure that your vehicle stays in good operating order,
we recommend that you periodically have your vehicle
checked by a Power Wheels
See page 33 for the list of authorized service centers or
call 1-800-348-0751 for the location of the authorized
service center nearest you.
28
Caring
For Your Vehicle
authorized service center.
®

Advertisement

Table of Contents
loading

Table of Contents