Lowrance Radar Operation Instruction Manual page 47

3. Press ← → to move the EBL around the display. Line up the EBL
with a radar target to determine another target's relative bearing.
Check the display in the lower left-hand corner to see the target's rela-
tive bearing displayed digitally.
4. If you have more than one EBL/VRM on the radar display, repeat
these steps to reposition each EBL/VRM on the display.
This is a zoomed in view from the previous image, clearly showing the
radar target, Variable Range Marker and Electronic Bearing Line.
To remove an EBL/VRM from the display:
1. Press to call up the EBL/VRM menu. Select the EBL/VRM you
ENT
want to remove and press
2. Press
EXIT
screen.
3. Repeat these steps to remove each EBL/VRM from the display.
VRM (Variable
Range Marker)
Radar
Target
ENT
and the desired EBL/VRM will be removed from the
EBL (Electronic
Bearing Line)
.
41