Lowrance Radar Operation Instruction Manual page 14

Caution:
Leave the radar in Standby Mode for 30 minutes when activat-
ing it the first time. This will help maximize the life of the mag-
netron. After the radar has been activated the first time, ignore
the Radar Notice.
4. Press
PAGES
5. Press ↓ to select
Radar only highlighted on Radar Pages menu (left). Radar menu with
6. Press
MENU
and press
ENT
and press
Y
ES
depending on the model of radar you have.
7. After the countdown is finished, the unit will enter STANDBY mode.
8. Access the Radar Setup menu to make sure your radar display is set
to Heading Up and is set to a Full Color scheme. Press
and press
R S
ADAR ETUP
Radar Setup selected from Radar menu (left). Radar Setup menu with
, then use ← → to select the radar tab.
R O
ADAR NLY
Radar Power selected (right).
, then use ↑ ↓ to select
. A confirmation message will appear. Press ← to select
. A warm-up countdown will commence that will vary
ENT
.
ENT
Full Color on Black highlighted (right).
then press
EXIT
R P
ADAR
8
.
from the radar menu
OWER
, select
MENU