Lowrance Radar Operation Instruction Manual page 45

NOTE:
If you are on a page where the screen is split between radar and
another page display, make sure the radar is the active page. With
the exception of the map page, the active page on the screen will be
denoted by a blue bar at the top of its window. (The Map Page will
display "Active Map" at the top of the map.) To toggle the active
status of the pages, press Pages twice.
Radar
Cursor
Boxes
The Radar Cursor boxes are show in white in the top, left-hand corner.
The Radar Cursor is aligned with a target in the bottom-right portion
3. Press
ENT
sired EBL and VRM and press
dinates have been assigned to the EBL/VRM you selected. The EBL and
VRM coordinates will be listed in the bottom left and right-hand cor-
ners of the display.
4. If you want to use more than one EBL/VRM at a time, repeat these
steps for each EBL/VRM you want to set up.
To manually set up an EBL and VRM:
1. Press
ENT
press .
ENT
2. Press ↑ ↓ to increase or decrease the size of the circular VRM. To find
the distance to a radar target, increase the size of the VRM until it is
lined up with the target.
to launch the EBL/VRM menu. Use ↑ ↓ to select the de-
to launch the EBL/VRM menu. Select an EBL/VRM and
Radar cursor
of the screen
| |
ENT ENT EXIT
39
. The Radar Cursor coor-