Lowrance Radar Operation Instruction Manual page 36

Selecting Adjust Antenna Park will place a dialog box in the upper
right-hand corner of the screen. Use Arrow keys to adjust it.
NOTE:
Each antenna is different, so there is no recommended setting for
Antenna Park. You must use the trial and error method of making
an adjustment then check the result. Repeat that process until the
antenna comes to a stop in the desired position.
To adjust Antenna Park:
1. Before adjusting Antenna Park, make sure your vessel is stationary.
Then, from the Radar Page, press
.
ENT
2. Press →|↓ to
the Adjust Antenna Park dialog box in the upper right-hand corner of
the screen.
3. Use ← → to input the desired setting.
4. Test your settings by putting the radar into STANDBY Mode. Ob-
serve the location where the antenna stops. Repeat the steps above un-
til the desired location is achieved. Press
page display.
Remember; you must not be moving when attempting to adjust Antenna
Park settings. Your vessel must be stationary for the antenna to stop in
the desired position. If you attempt to adjust Antenna Park while the
vessel is underway or if the antenna stops in the desired position and
you begin moving, the wind will move the antenna out of position.
A A
DJUST NTENNA
, select
MENU
and press
P
ARK
EXIT
30
and press
R S
ADAR ETUP
. That will display
ENT
to return to the main