Receiving An All Ships Call (All Ships); Receiving An Individual Call (Indiv) - Lowrance Link-5 VHF User Manual

5-3-1 Receiving an All Ships Call (ALL SHIPS)

1. When you receive notification of an ALL SHIP call, rotate the SILENCE knob (CH SELECT)
to silence the alarm. The priority level and the user MMSI are displayed on the screen.
If the radio recognises the user MMSI as one of your buddies, the buddy's name is
displayed in place of the user MMSI.
2. Press ACCEPT (ENT) to switch to the designated channel immediately or press QUIT
(EXIT) to return to the current working channel.
Note: The radio will automatically switch to the designated channel after 10 seconds if no key
is pressed and AUTO SWITCH = ON (see Section 4-8):
ALL SHIP
SAFETY FROM
TOM
▼
Note: These additional
information screens are
available by rotating the
CH knob.
However, If AUTO SWITCH =OFF, then AUTO SW OFF will be displayed and manual channel
change is required:
ALL SHIP
SAFETY FROM
TOM
▼
Note: These additional
information screens are
available by rotating the
CH knob.
3. No acknowledgement is needed. Press PTT to initiate voice contact.
4. The call data is stored in the Call Log (see Section 5-2-7).

5-3-2 Receiving an Individual Call (INDIV)

1. When you receive notification of an INDIV call, rotate the SILENCE knob (CH SELECT) to
silence the alarm. INDIV calls are almost always Routine priority. If the radio recognises
the user MMSI as one of your buddies, the buddy's name is displayed in place of the
user MMSI.
38
SAFETY FROM
TOM
AUTO SWITCH
00:01
AUTO SWITCH
CH14 IN 10S
10:12 UTC
▲▼
00:04
SAFETY FROM
TOM
AUTO SW OFF
00:12
AUTO SW OFF
CH14 REQUEST
10:12 UTC
▲▼
00:20
Lowrance - Link-5 Operation and Installation Instructions
▲▼
00:02
CH14 IN 10S
10:12 UTC
ENT–> ACCEPT
▲▼
00:05
▲▼
00:15
CH14 REQUEST
10:12 UTC
ENT–> ACCEPT
▲▼
00:23
TOM
AUTO SWITCH
CH14 IN 10S
▲▼
00:03
10:12 UTC
ENT–> ACCEPT
KEY->SILENCE
▲▼
TOM
AUTO SW OFF
CH14 REQUEST
▲▼
00:18
10:12 UTC
ENT–> ACCEPT
KEY->SILENCE
▲▼
00:06
00:25