Table of Contents
Advertisement
DSC SETUP
INDIV REPL▲
DSC FUNC
►LL REPLY
▼
1.
Select DSC SETUP, then LL REPLY.
2.
Select your response and press ENT to confirm and return to the menu.
4-8 Automatic Channel switching (AUTO SWITCH)
When a DSC call is received, it may include a request to change to a specific channel for
subsequent communications. If a channel switch request is included, your options are:
•
allow the radio to switch to the requested channel immediately by pressing the ENT
button, or
•
do nothing to allow the radio to automatically switch to the requested channel after a
delay of 10 seconds, or
•
cancel the automatic switch and remain on the current channel by pressing the EXIT
button.
However, automatic switching to a subsequent communications channel on receipt of a DSC
call might in some cases disrupt important ongoing communications if the working channel
changes without the operator knowing.
You can prevent the radio from automatically switching from the current working channel by
setting the AUTO SWITCH feature to OFF.
If the AUTO SWITCH feature is set to OFF, an
that this feature is set to off. Additionally, the text "AUTO SW OFF" will be included in an All
Ships or Group call replacing the text "AUTO CHxx"
DSC SETUP
▲
DSC FUNC
LL REPLY
►AUTO SWITC▼
1.
Select DSC SETUP, then AUTO SWITCH.
2.
Select ON (on) to enable automatic channel switching.
3.
Select OFF (off) to disable automatic channel switching.
28
LL REPLY
MANUAL
►AUTO
OFF
AUTO SWITCH
►ON
OFF
Lowrance - Link-5 Operation and Installation Instructions
X
will be displayed on the LCD to remind you
Hide quick links:
Advertisement
Table of Contents
