Table of Contents
Advertisement
3-3 Channel Names (CH NAME)
The channel charts are listed in Appendix C with their default name tags. CH NAME gives you
the option to edit or delete the channel name tags displayed on the screen.
RADIO SETUP
►CH NAME
RING VOLUME
▼
KEY BEEP
EDIT CH NAME
TELEPHONE
1.
Select RADIO SETUP, then CH NAME.
2.
Use + or - to step through the channels with their name tags until you see the channel
name tag you want to change, then press ENT. In this example, the channel name
TELEPHONE associated with channel 01 is being changed to PHONE1.
3.
Select EDIT and press ENT to edit the existing name tag. Input the new name over the
existing name. It can be a maximum of 12 characters.
To delete the channel name, select DELETE and press ENT.
4.
Press ENT (repeatedly if necessary) to display the YES/NO confirmation.
5.
Press ENT to confirm the new channel name tag or the deletion, then press EXIT to
return to the menu.
3-4 RING & BEEP Volume (RING VOLUME) and (KEY BEEP)
Set the volume level of the incoming signal beeps (RING VOLUME) and/or the error and warn-
ing beeps (KEY BEEP) to HIGH (high) or LOW (low) as follows:
RADIO SETUP
CH NAME
►RING VOLUME
▼
KEY BEEP
1.
Select RADIO SETUP, then RING VOLUME or BEEP VOLUME as appropriate.
2.
Select a HIGH or LOW volume. (It is possible to turn the beeps off completely by
selecting KEY BEEP then OFF.)
3.
Press ENT to enable the new volume setting and return to the menu.
3-5 Internal Speaker Connections (INT SPEAKER)
Switch the radio's internal speaker ON (on) or OFF (off ). The external speaker is always ON (on)
if a speaker is plugged into the external speaker jack.
01
CH NAME
TELEPHONE
EDIT CH NAME
PHONE1
►YES
NO
RING VOLUME
►HIGH
LOW
Lowrance - Link-5 Operation and Installation Instructions
TELEPHONE
►EDIT
DELETE
KEY BEEP
►HIGH
LOW
OFF
21
Hide quick links:
Advertisement
Table of Contents
