Channel Select - Lowrance Link-5 VHF User Manual

and CH2 remain unless you delete them.
To delete a favourite channel, select that channel then hold down 3CH until the CH1,
CH2 or CH3 symbol disappears off the LCD.
PAUSE DISTRESS CALL mode only: Pause the automated distress alert resend countdown
timer.
SCAN Scan.
Press to scan between your current channel and the priority channel in DUAL or
TRI WATCH mode. The weather channel is also scanned if the USA channel bank is
selected and the weather alert mode (ALT) is ON.
Hold down SCAN to enter ALL SCAN mode where the priority channel is checked
every 1.5 seconds.
When a signal is received, scanning stops at that channel and
the screen. If the signal ceases for more than 5 seconds, the scan restarts.
Press ENT to temporarily skip over (lock out) an "always busy" channel when in ALL
SCAN mode and resume the scan. If a channel is skipped, the word 'SKIP ON' will
momentarily replace the channel name shown on the LCD to designate a skipped
channel. The channel name will then have ' *' appended to the end of the channel
name. Note that it is not possible to skip over the priority channel.
To cancel a skipped channel, select the channel while in normal mode (non-scan
mode) then press the ENT key - 'SKIP OFF' will be displayed momentarily and the
channel will be restored. Alternatively, you can re-power the radio.
Press SCAN to stop at the current channel.
Press EXIT to cancel scan mode and return to normal operation.
DISTR. CANCEL DISTRESS CALL mode only: Press to send a distress cancel call.
Rotary knob

Channel Select.

Turn to select a channel. The current channel is shown on the LCD in BIG digits and an
A or B designator suffix (if applicable) in small letters below the channel number.
See Appendix C for a complete listing of channel charts.
Push to activate the ENT function.
You can also use the rotary knob for alphanumeric entry. Turn to step through
alphanumeric characters one at a time, then push to confirm each selection. If you
make an error, select the < character then push to backup.
SILENCE DSC Call mode only: Rotate the rotary knob to silence the call alert when a DSC call is
received.
+ / - Channel Select.
(Located on the handset mic). The current channel is shown on the screen in BIG digits
with an appropriate designator suffix A or B in small letters below the channel number.
Press + or - to step through the available channels one at a time, or hold down to
scroll rapidly through all the available channels.
See Appendix C for a complete listing of channel charts.
Lowrance - Link-5 Operation and Installation Instructions
BUSY
appears on
11