Replacing The Graphic Card - Lenovo Erazer X700 Hardware Maintenance Manual

Step 8. Open the front door, then slide out the optical drive as shown.
5 6
Step 9. To install the new optical drive:
a. Slide the new optical drive into the bay from the front until it snaps into position.
b. Connect the data and power cables to the new disk drive.
Step 10. Reattach the computer cover.

Replacing the graphic card

To replace the graphic card:
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"
and "Rear view" for help with locating the various connectors.
Step 4. Remove the computer cover. Refer to "Removing the computer cover".
30
Lenovo Erazer X700Hardware Maintenance Manual