5
• Slide a hex bushing onto the rear axle. The ring side of
the hex bushing should face out.
• Press firmly to fit all but the ring on the end of the hex
bushing into the rear wheel.
6
• Fit a cap nut on the end of the rear axle.
• Tap the cap nut with a hammer to secure it on the end of
the rear axle.
• Pull on the wheel to make sure the cap nut is securely
fastened.
• Repeat this procedure to assemble the other rear wheel
to the other rear axle.
Assembly
Rear Axle
Hex
Bushing
Ring Side
Cap Nut
11
7
Round
Bushing
Ring
Side
Front Axle
• Slide a large washer onto the front axle.
• Slide a round bushing onto the front axle, ring side first.
8
• Slide a front wheel, small round hole first, onto the front
axle.
Large
Washer
Front Wheel
Small Round Hole
Front Axle
Round
Large
Bushing
Washer