2.5
Physical characteristics
Drive specification
Maximum height
(mm)
(inches)
Maximum width
(mm)
(inches)
Maximum length
(mm)
(inches)
Maximum weight
ST3500641SV
ST3250824SV
ST3160812SV
2.6
Seek time
Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using
drive diagnostics. The specifications in the table below are defined as follows:
• Track-to-track seek time is an average of all possible single-track seeks in both directions.
• Average seek time is a true statistical random average of at least 5,000 measurements of seeks between
random tracks, less overhead.
Typical seek times (msec)
Track-to-track
Average
Average latency:
These drives are designed to consistently meet the seek times represented in this manual. Physical
Note.
seeks, regardless of mode (such as track-to-track and average), are expected to meet or exceed
the noted values. However, due to the manner in which these drives are formatted, benchmark
tests that include command overhead or measure logical seeks may produce results that vary from
these specifications.
12
26.1
1.028
101.6
4.000 +/- 0.010
146.99
5.787
710 grams (1.57 lbs)
580 grams (1.28 lbs)
Read
0.8
18
4.16
Write
1.0
20
4.16
SV35 Series SATA Product Manual, Rev. C