Seagate SV35 Series SATA Product Manual page 11

Table 1: Drive specifications for 500 Gbyte models
Drive specification
Altitude, nonoperating
(meters below mean sea level, max)
Shock, operating (max at 2 msec)
Shock, nonoperating (max at 2 msec)
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power
Idle** (bels)
Operational, DVR seeks (bels)
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Warranty
Contact start-stop cycles
(25°C, 50% relative humidity)
Supports Hotplug operation per SATA II
specification
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
.
power to operational levels.
SV35 Series SATA Product Manual, Rev. C
ST3500641SV
–60.96 m to 12,192 m
+
(–200 ft to 40,000 ft)
63 Gs
300 Gs
5-22 Hz: +/-0.25", Displacement limited
22-350 Hz: 0.5 Gs
350-500 Hz: 0.25 Gs
5-22 Hz: +/-0.25", Displacement limited
23-350 Hz: 5.0 Gs
351-500 Hz: 1.0 Gs
2.79 (typical)
2.96 (max)
2.71 (typical)
2.88 (max)
14
1 per 10 bits read
<1%
5 years on distribution units.
To determine the warranty for a specific drive, use a web
browser to access the following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You will
be asked to provide the drive serial number, model number (or
part number) and country of purchase. The system will display
the warranty information for your drive.
50,000
Yes
5