Seagate SV35 Series SATA Product Manual page 13

Table 2: Drive specifications for 250 Gbyte models
Drive specification
Altitude, nonoperating
(meters below mean sea level, max)
Shock, operating (max at 2 msec)
Shock, nonoperating (max at 2 msec)
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power (bels)
Idle** (bels)
Operational, DVR seeks (bels)
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Warranty
Contact start-stop cycles
(25°C, 50% relative humidity)
Supports Hotplug operation per SATA II specification
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
SV35 Series SATA Product Manual, Rev. C
ST3250824SV
–60.96 m to 12,192 m
+
(–200 ft to 40,000 ft)
63 Gs
350 Gs
5-22 Hz: +/-0.25", Displacement limited
22-350 Hz: 0.5 Gs
350-500 Hz: 0.25 Gs
5-22 Hz: +/-0.25", Displacement limited
22-350 Hz: 5.0 Gs
350-500 Hz: 1.0 Gs
2.67 (typical)
2.82 (max)
2.8 (typical
2.9 (max)
14
1 per 10 bits read
<1%
5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to access
the following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You will be asked to
provide the drive serial number, model number (or part number) and coun-
try of purchase. The system will display the warranty information for your
drive.
50,000
Yes
7