Physical Characteristics; Mechanical; Mounting Instructions - SanDisk 5000 Product Manual

Ssd sata 5000 2.5"
Hide thumbs Also See for 5000:
Table of Contents

Advertisement

SSD SATA 5000 2.5"

Physical Characteristics

4.

Mechanical

4.1
Table 6: SanDisk SSD SATA 5000 2.5" Mechanical Dimensions and Weight
Parameter
Width
Height
Length
Maximum Weight

Mounting Instructions

4.2
Before unpacking and installing the drive, take anti-static measures in
order to avoid damage to the drive. The drive may be exposed to potential
handling and electrostatic discharge (ESD) hazards. The following
guidelines are recommended:
Keep the drive in ESD bag until the drive is ready to be installed.
Wear an ESD-proof wrist strap when handling the drive.
Avoid touching the drive's connector. Handle the drive using its edge
or frame.
Rest the drive on an antistatic surface until mounting it.
Handle the drive carefully, taking care not to drop or bang it against
other objects.
Do not remove, damage or cover any product labels. Removal of such
labels voids the warranty.
The ambient temperature at the top cover should not exceed the
maximum operating temperature of the drive.
Exercise caution when removing the drive from the host as the drive
may have heated up.
The recommended mounting screw torque is 0.675Nm.
The recommended mounting screw depth is 4.0mm (0.157in) for
bottom for horizontal mounting.
© 2008 SanDisk® Corporation
Specifications
69.85 ± 0.25 mm
9.5 ± 0.2 mm
102.0 ± 0.25 mm
96 gr
8
July 2008, Document No. 80-11-01488
Product Manual
Rev 0.7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sds5c-016g-000000 - ssd 16 gb hard drive

Table of Contents