Interface; Supported Standards; Interface Connector Characteristics; Hotplug Support - SanDisk 5000 Product Manual

SSD SATA 5000 2.5"

Interface

7.

Supported Standards

7.1
The SSD complies with the following standards:
ATA/ATAPI-7: ANSI INCITS 397-2005, AT Attachment with Packet
Interface-7.
Serial ATA Revision 2.5 Specification (Ratification Date: October 27,
2005).

Interface Connector Characteristics

7.2
Table 15: SanDisk SSD SATA 5000 2.5" Connector Characteristics
Parameter
Drive Connector
Mating/Unmating force
Durability

Hotplug Support

7.3
The SSD supports hotplug operation per SATA 2.5 specification.

SATA Bridge Support

7.4
The SSD supports Marvell's Serial ATA bridge (P/N: 88SA8040).

Interface Connector Drawing

7.5
Figure 3: Interface Connector View
© 2008 SanDisk® Corporation
Specifications
FCI, 10039651-001LF
The force to mate a receptacle connector
and compatible plug connector should not
exceed 45N (4.6kgf)
The unmating force should not be less than
10N (1.0kgf)
5,000 cycles
14 July 2008, Document No. 80-11-01488
Product Manual
Rev 0.7