Samsung SGH-T589 User Manual page 142

Manually Add a New Network Connection
Tap Add Wi-Fi network.
1.
Enter the Network SSID (the name of your Wireless Access
2.
Point).
Tap the Security field and select a security option. This must
3.
match the current security setting on your target WAP.
Enter your WAP's password if the WAP is secure.
4.
Tap Save to store the new information and connect to the
5.
target WAP.
Note: No prompt to enter the WAP key displays if you have previously
connected to the wireless network. The WAP key is required when the
device is reset using factory default settings.
Deactivating Wi-Fi
Press
1.

Wireless and networks
Tap the Wi-Fi field to deactivate the feature. The checkmark
2.
grays.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
reduce battery life and use times.
134
and then tap (Settings)
Wi-Fi settings.

Manually Scan for a Wi-Fi Network
Press
1.
Wireless and networks
Press
2.
Wi-Fi Status Indicators
The following icons indicate the Wi-Fi connection status:
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set up many of
the device's Wi-Fi services, including:

Setting the Wi-Fi sleep policy
•
Viewing the device's MAC Address
•
Configuring use of either a DHCP or Static P
•
To access the Wi-Fi Advanced Settings menu:
Press
1.
Wireless and networks
and then tap

Wi-Fi settings.

and then tap Scan.
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active and there are open
networks available.
and then tap

Wi-Fi settings.

(Settings)

(Settings)
