Wi-Fi - Samsung SGH-T589 User Manual

Connect the multifunction jack on your device to a PC using
3.
an optional PC data cable.
A pop-up window displays on the PC when connected.
Open the folder to view files.
4.
Copy files from the PC to the memory card.
5.
Enabling USB Debugging
USB debugging is intended for development purposes.
Press
1.

Applications Development.

Tap the USB debugging field to place a check mark in the
2.
selection box.

Wi-Fi

About Wi-Fi
Wi-Fi (short for "wireless fidelity") is a term used for certain types
of Wireless Local Area Networks (WLAN). Wi-Fi communication
requires access to an existing and accessible Wireless Access
Point (WAP). A WAP can either be Open (unsecured) or Secured
(requiring knowledge of the router name and password).
and then tap (Settings)
Activating Wi-Fi
By default, your device's Wi-Fi feature is turned off (deactivated).
Activating Wi-Fi allows your device to discover and connect to
compatible in-range WAPs (Wireless Access Points).
Press
1.
Wireless and networks
Tap Wi-Fi to activate the feature. A checkmark indicates that
2.
Wi-Fi is active. The device scans for available in-range

wireless networks and displays them under Wi-Fi networks
on the same screen.
Connecting to a Wi-Fi Network
Press
1.
Wireless and networks
The network names and security settings of detected Wi-Fi
networks display in the Wi-Fi networks section.
Tap the network you wish to connect to.
2.
Note: When you select an open network you are automatically connected.
Enter a wireless password (if necessary).
3.
and then tap

Wi-Fi settings.

and then tap

Wi-Fi settings.

(Settings)

(Settings)

Connections 133