Table of Contents
Advertisement
use WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
Press
1.
Wireless and network
Tap WPS button connection.
2.
Press the WPS button on your Wi-Fi access point within 2
3.
minutes.
Add a Wi-Fi Network
To manually add a Wi-Fi network to the networks list:
Press
1.
Wireless and network
Tap Wi-Fi to turn it on.
2.
Tap Add Wi-Fi network.
3.
Enter the SSID (Service Set Identifier) and Security settings
4.
then tap Save.
166
and then tap
(Settings)
Wi-Fi settings.
and then tap
(Settings)
Wi-Fi settings.
Note: An SSID is a unique key that identifies a wireless LAN. Its purpose is to
stop other wireless equipment from accessing your LAN — whether
accidentally or intentionally. To communicate, wireless devices must be
configured with the same SSID.
Wi-Fi Direct Settings
Wi-Fi Direct allows Wi-Fi devices to talk to each other without the
need for wireless access points (hot spots).
Note: Activating this feature will disconnect your current Wi-Fi network
connection.
Press
1.
Wireless and network
Tap Wi-Fi Direct. A check mark displays next to the feature
2.
indicating it is enabled. Your phone will search for other
devices enabled with Wi-Fi direct connections.
Tap a device name to begin the connection process.
3.
Note: The target device must also have Wi-Fi Direct service activated and
running before it can be detected by your device.
Tap Connect. The direct connection is established.
4.
and then tap
Wi-Fi Direct settings.
(Settings)
Advertisement
Table of Contents
