Table of Contents
Advertisement
This feature allows you set the phone to automatically switch to
power saving mode when the battery is low and configure
additional power saving options.
Press
1.
saving mode. Tap Use Power saving mode. A check mark
displayed at the right side and
indicate active status.
To adjust power saving options:
Activate power saving mode (see above).
1.
Tap Power saving on at to assign the "battery low" level at
2.
which the power saving mode is activated (10% battery
power, 30%, 50% or 70%.
To activate additional power saving features:
Activate power saving mode (see above).
1.
Tap any of the available fields to adjust additional power
2.
saving parameters.
• Turn Off Wi-Fi to disable Wi-Fi when it is not connected to a
router.
• Turn Off Bluetooth to disable Bluetooth when not in use or
actively transmitting data.
178
and then tap
(Settings)
in the status bar
• Turn Off GPS to disable the GPS location system when not in
use.
• Turn off Sync to disable the feature when the phone is not
synchronizing with the server.
Power
• Brightness to enable screen brightness adjustment.
• Brightness to adjust the brightness of the screen. For more
information, refer to "Adjusting Screen Brightness" on
page 177.
• Screen timeout to adjust the time delay before the screen turns
off when inactive.
• Power saving tips display additional information on the power
saving features.
Advertisement
Table of Contents
