Table of Contents
Advertisement
• Remote device allows you to receive and playback media stored
externally (server, laptop, etc.) directly on your device.
Configuring AllShare Settings
The AllShare™ application must first be configured prior to its
initial use. You must setup parameters such as connected Wi-Fi,
Items to share, source server address, and external device
acceptance rights.
From the Home screen, tap
1.
(AllShare).
Press
and then tap Settings and configure the
2.
following settings as desired:
• Device name: defaults to your phone name. Use the keypad to
enter a new name if desired, and tap Save.
• Share videos/photos/music: allows you to restrict what is shared
from your phone. Tap the selection boxes to select or deselect
items you want to share (add or remove a check mark).
• Upload from other devices: allows you set the phone to select
whether to accept uploads from other devices. Tap Always
accept, Always ask, or Always reject.
• Default memory: allows you to have media saved to your Phone
or Memory Card. Tap an option.
• Subtitles: allows you to see subtitles on shared media.
126
(Applications)
Depending on the setting you changed, a pop-up screen
may display to restart AllShare. Tap Yes to continue.
Transmitting Media via AllShare
Tap the My device tab, select Videos, Photos, or Music, and
1.
then tap on the media that you would like to share.
At the Select device screen, any devices that you can share
2.
with are displayed.
Tap on a device to share media.
3.
Receiving Media via AllShare
Tap the Remote device tab at the top of the screen. All
1.
devices that you can receive media from are displayed.
Tap a device name. Media that you can receive from the
2.
other device is listed.
Tap an item that you want to stream to your phone.
3.
Advertisement
Table of Contents
