Tethering - Samsung GALAXY S II SGH-T989D User Manual

Portable quad-band mobile phone
Hide thumbs Also See for GALAXY S II SGH-T989D:
Table of Contents

Advertisement

Wi-Fi Status Indicators
The following icons indicate the Wi-Fi connection status:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active and there is an available
open wireless network.
Displays when Wi-Fi is configured for a direct
connection to another compatible device in the same
direct communication mode.
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set up many of
the device's Wi-Fi services, including:
Setting the Wi-Fi sleep policy
Viewing the device's MAC Address
Configuring use of either a DHCP or Static P
To access the Wi-Fi Advanced Settings menu:
Press
1.
Wireless and network
Press
and then tap Advanced.
2.
158
and then tap
(Settings)
Wi-Fi settings.

Tethering

This option allows you to share your phone's mobile data
connection via a direct USB connection between your phone and
computer.
Note: You can also create a wireless access point that can be used by multiple
computers. For more information, refer to "Portable Wi-Fi Hotspot" on
page 159.
Note: You can not mount your phone's microSD card to your computer while
using the USB tethering feature. If additional software or USB drivers
are required, navigate to
Downloads.
Press
1.
Wireless and network
Connect the USB cable between your computer and your
2.
phone.
Tap USB tethering from the Tethering menu. This places a
3.
green check mark next to the entry and activates the
feature. The Tethering active icon
Status bar.
and select Support 
http://www.samsung.ca
and then tap
Tethering and portable hotspot.
appears in the
(Settings)

Advertisement

Table of Contents
loading

Table of Contents