Badress Management Of Freeze Cycle - Samsung SR-61KTC Service Manual

4. Badress management of freeze cycle

Appearance
EVAP is cold and warm
COND is warm, when EVAP
is cold.
This movement is reply.
Cond is cold EVAP isn't cold.
Comprssor temp. is high.
SUCTION PIPE is same the
DISCHARGE PIPE.
EVAP doesn't cold COND is same
the nomal temperature.
Product frost to suction PIPE
Ouerheat of COND.
Cooling state of EVAP be
ineffective.
COND is cold
Surace temp of compressor is high
Refrigerator isn' t cold at once
Cause
Interruption for
moisture(Iced)
Other material is
infiltrated and cooling
cycles is interrupted
Badness the
compressor
full of ice
About a haif of EVAP is
covered frost and particular
freeze becase disclosure the
ice is ilttle.
－52－
Caun termeasure
Pour into ice.
Check interrupt section and
repairs.
Change compressor
Pour into ice
After weid the
disclosure part,
pour into ice.