Operating Instructions; Setting The Clock; Setting The Timer; Microwave Cooking - Russell Hobbs RHM2016 Instruction Manual

Connect the main plug into a suitable 13amp mains socket, make sure the voltage is the
same as on the rating label (do not use extension cables or mains adaptors).
The microwave oven will beep once and the display will show the clock symbol and '1:01'
During any cooking program,
To pause cooking press the CANCEL pad.
To stop cooking press CANCEL pad again.
Cooking or defrosting can be interrupted at any time to stir or check the food progress
by opening the door. Press START pad to continue program after closing the door.
After cooking time has elapsed 'End' will be displayed and 3 beeps will be heard every
2 minutes until the oven door is opened or the CANCEL pad is pressed.

SETTING THE CLOCK

With the oven ready for input, touch the CLOCK pad to set the digital clock in
12 hour format.
FOR EXAMPLE: Suppose you want to set the oven clock time to 8:30.
1. Touch the CLOCK pad.
2. Touch CANCEL pad.
3. Use the number pads to enter the correct time, press the 8, 3 and 0 pads. You must
touch at least three numbers to set the clock (one for hour and two for minutes).
4. Touch CLOCK pad again to confirm the setting.
NOTE: To check clock time during cooking, press the CLOCK pad once.

SETTING THE TIMER

To use the clock as a kitchen
5. Touch the TIME pad.
6. Enter the amount of time you want to count down by touching the number pads. The
time is expressed in minutes and seconds and set left to right. Set one digit (a 5 for 5
seconds) or up to four digits (2405 for 24 minutes, 5 seconds).
7. Touch POWER pad.
8. Touch number pad 0.
9. Touch START pad and the timer will activate.

MICROWAVE COOKING

1. Place the food in a container suitable for use with microwave ovens, put it into the
microwave oven and close the door.
2. Use the number pads to set a cooking time. You can set a cooking time from one second
to 99 minutes and 99 seconds.
3. If you want to set a power level other than 100% power, touch POWER pad, then use
the number pads to enter the power level. Use digits to set corresponding cooking
power level (see table below).
4. Touch START pad to start cooking.
5.
Cooking power 100%
Number pad 10
NOTE: You can check the power level during cooking by touching t h e POWER p ad.
For Customer Services & Spare Parts please call 0845 209 7461 Opening times: Monday – Friday 8am – 6pm

Operating instructions

timer.
90% 80% 70%
9 8 7
60% 50% 40%
6 5 4
8
30% 20% 10%
3 2 1
0%
0