Table of Contents
Advertisement
Chapter 3
Installation
connections under severe shock or vibration. Both terminal blocks have a safety cover, secured with two Phillips
screws, which must be removed to make connections. The safety cover must be re-attached after wiring to
ensure personnel safety.
For AC and DC power supply wiring examples, refer to
Section 3.2.5, "DC Power Supply Wiring
WARNING!
The RX1501 has one (1) power supply installed. Service personnel must isolate all power supplies
prior to servicing.
Section 3.2.1
Connectors for HI and HIP Power Modules
Figure 38: Screw Terminal Power
Connector for HI Power Module
Section 3.2.2
Connectors for 24, 24P, 48, and 48P Power Modules
Figure 40: Screw Terminal Power
Connector for 24 and 48 Power Modules
18
Section 3.2.4, "AC Power Supply Wiring Example"
Example".
Figure 39: Pluggable Phoenix Power
Connector for HIP Power Module
Figure 41: Pluggable Phoenix Power
Connector for 24P and 48P Power Modules
Connectors for HI and HIP Power Modules
RuggedBackbone™ RX1501
Installation Guide
and
Advertisement
Table of Contents
