Recording A New Song - Korg Sound on Sound Owner's Manual

Unlimited track recorder
Hide thumbs Also See for Sound on Sound:
Table of Contents

Advertisement

Available languages

Available languages

Please note that you cannot adjust the input 
level if the LVL CTRL (level control) parame‐
ter has been set to AUTO (see "LVL CTRL" 
on page 29). 
4. Press the Stop button to cancel Record Ready 
mode. The Record LED indicator will turn off.

Recording a new song

Data recorded on the SOUND on SOUND is called 
a "song."
Before you start recording a song, you must create a 
new song file to record with.
1. Follow one of the three methods described 
below to create a new song file.
• If you have not recorded any songs after for‐
matting a memory card, or if you have deleted 
all songs (see page 37) and the song title 
"NEW/001" appears on the LCD, press the 
Record button.
• If there are only a small number of recorded 
songs (for example, if the song indicator "002/003" appears on the 
LCD), you can press the 
this case, "NEW"), then press the Record button.
• If numerous songs exist (for example, if the song indicator "002/025" is 
displayed on the LCD) and if you want to start recording immediately, 
press and hold down the Stop button and press the Record button.
If the Record LED indicator flashes quickly (about twice per sec‐
ond) after you press the Record button, the unit is in Record Ready 
mode for a new song.
If the Record LED indicator flashes slowly (about once per second) 
after you press the Record button, you must select a new song file 
(see "Overdubbing (Sound‐On‐Sound)" on page 17). Create and 
select a new song file.
2. To start recording, while the unit is in Record Ready mode (and the 
Record LED indicator is flashing), press the Record button again to 
start recording. The Record LED indicator will light up steadily.
You can also start recording at the moment the audio starts (see 
"AT START" on page 30).
3. To pause recording, press the Stop button. The Record LED indicator will flash.
4. To resume recording, press the Record button (the Record LED indica‐
tor will light up). Alternatively, to finish recording, press the Stop but‐
ton again (the Record LED indicator will turn off).
 button to select the empty song file (in 
Level meter
Currently-selected
song number
Total number
of songs
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents