Other Functions; Using The Effects - Korg Sound on Sound Owner's Manual

Other Functions

Using the effects

The SOUND on SOUND features 100 high‐quality built‐in effects, includ‐
ing amp models developed by "
technology. These effects can be applied to both input audio and recorded
songs (see "FX" on page 35).
The effects sound may be distorted or noisy, depending on the type or
input level of the connected musical instruments, or the type of effects.
What is
(Resonant structure and Electronic circuit Modeling System)
is KORG's proprietary sound modeling technology which precisely
reproduces the complex character and nature of both acoustic and elec‐
tric instruments as well as electronic circuits in real world environ‐
ments.
characteristics including instrument bodies, speakers & cabinets,
acoustic fields, microphones, vacuum tubes, transistors, etc.
Turning the effects on or off
1. Press the FX button to turn the effects on. The Effect LED indicator will
light up.
2. Press the FX button again to turn the effects off. The Effect LED indica‐
tor will turn off.
Selecting an effect and setting the effect parameters
1. Press and hold down the FX button to display
the Effect Select page (TYPE).
2. Press the + or ‐ button to select an effect.
3. You can change the parameter value displayed
on the FX EDIT 1 page by using the touch slider.
The parameter type varies depending on the
effect.
4. Press the button to access the FX EDIT 1 or
FX EDIT 2 page. A parameter for the selected
effect will be displayed.
5. Press the + or ‐ button (or touch slider) to modify
the parameter value. (On the FX EDIT 1 page,
this step is the same operation as described in
Step 3 above.)
22
?
emulates a wide variety of sound generation
," Korgʹs proprietary modeling
Touch slider
FX EDIT 1
Touch slider