Cabinet Cutout Dimensions - KitchenAid Ice Maker Use & Care Manual

The following dimension chart and illustration include cutout dimensions and minimum spacing requirements for all built-in outdoor
products. The illustration is for reference. The design of your cabinet layout can be personalized, but the dimensions for the cutouts and
minimum spacing must be followed.
*NOTE: Maintain a minimum
countertop out of the door or drawer.
K
B
**Each corner of countertop cutouts for built-in grill, side burner, sear burner, Power™ burner and refreshment center.
Between 2 or more sets of Access Doors adjacent to each other:
K = 14" (35.6 cm) when 2 adjacent doors are opened to 90 degrees
K = 8" (20.3 cm) when 1 of the adjacent doors is opened to 90 degrees
Between a set of Access Doors and a Trash Drawer, Utility Drawer, Warming Drawer, Refrigerator, or Ice Maker:
K = 8" (20.3 cm) when 1 of the adjacent doors is opened to 90 degrees
Between a Trash Drawer, Utility Drawer, or Warming Drawer:
K = 3" (7.6 cm)
4

Cabinet Cutout Dimensions

" (1.9 cm) countertop overhang from the door/drawer mounting surface to help keep water runoff from the
C
C
E
K
J
K
M
Minimum Spacing Requirement Between Cutouts - Dimension K
D
L
K F
E
D
K
G
A
H