Av Output Interface Setup; External Device Control - Kenwood DNX7280BT Instruction Manual

AV Output Interface Setup

You can select an AV source to be output at
the AV OUTPUT port. Default is "OFF."
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [AV-OUT Interface].
AV-OUT Interface screen appears.
4
Touch [2] or [3] to set [AV-OUT] to
VIDEO, DISC, iPod, or OFF.

External Device Control

Control the external device power supply.
1
Touch [EXT SW] in the Source Control
screen.
EXT SW Control screen appears.
NOTE
• If [EXT SW] is not displayed, touch [
2
Touch the desired switch key.
You can turn on or off the external device
power supply.
NOTE
• You must connect a commercially available relay
unit in order to use this function. Connect the
external device to be controlled to that relay unit.
See EXT SW setup (P.70) for information on setting
•
the power on or off specification.
Return to the Top page
Setting Up
].
77