Hands-Free Control - Kenwood DNX7280BT Instruction Manual

Return to the Top page
Bluetooth Operation

Hands-Free Control

You can perform various setup about hands-
free function.
1
Press the <TEL> button.
Hands Free screen appears.
2
Touch desired key in the Hands Free
screen.
See the following section for each setting.
• Set up the Hands-Free system
• Set up SMS (P.61)
• Preset the phone number
• Register your voice
• Register key word voice
60 60
(P.60)
(P.63)
(P.64)
(P.65)
Setting up the Hands-Free
phone
1
Touch [TEL SETUP] in the Hands Free
screen.
Hands Free SETUP screen appears.
2
Set each item as follows.
Auto Response*
1
Sets an automatic response time to pick-up an
incoming call.
OFF (Default)*
2 : A utomatic response is not
available.
0-99: Set calling ring time (second).
Call Beep
Select whether to beep at an incoming call.
ON (Default): Beeps.
OFF: Not beeps.
SMS Receive Beep
Select whether to beep at an incoming SMS.
ON (Default): Beeps.
OFF: Not beeps.
Phone Information Use
Sets whether to download phonebook for
outgoing, incoming and missed calls list.
ON (Default): Yes.
OFF: No.
*1 E ither the time interval for automatic
answer set on this unit or the time interval
set on the cell-phone, whichever is shorter
takes effect.
*2 As for , the default value is "8".