Assembly
This package contains small parts
1
• Place the base tube on a flat surface as shown.
• Position the left and right base wires as shown.
Note the location of the colored tab on the left
and right base wires.
• Fit the left base wire into the base tube.
• Fit the right base wire into the base tube.
• Make sure both colored tabs on the base wires are visible through the
holes in the base tube.
CAUTION
in its unassembled state.
Adult assembly is required.
Right Base
Wire
Base Tube
Base Tube
Colored Tab
6
Colored Tabs
Left Base
Wire
Base Wire
Back View