Renaming Or Deleting Files/Folders; On A Usb Memory; Rename; Delete - Roland BK-5 Owner's Manual

Backing Keyboard BK-5
Using the BK-5 as a USB player
Button Explanation
[®÷π] Starts or pauses song playback.
[ª] Stops song playback.
[º] Rewinds the song.
[‰] Fast-forwards the song.

Renaming or deleting files/folders

on a USB memory

Rename

Here is how to change the name of a file or folder on
the connected USB memory.
1.
Connect an optional USB memory to the
BK-5.
After a few seconds, the display shows the contents
of the USB memory.
Press the [USB MEMORY] button if you inserted the
USB memory at an earlier stage and now want to
return to this display page.
2.
Rotate the [CURSOR÷VALUE] dial to select
the file or folder you want to rename.
3.
Press the [MENU] button to jump to the
"USB Memory Edit" page.
The display changes to:
36
To return to the BK-5's menu, press and hold the
[EXIT] button. While the contents of the connected
USB memory is displayed, pressing [MENU] takes you
to the "USB Memory Edit" page where you can select
"Rename", "Delete" or "Search".
NOTE
If you press [MENU] while an empty folder is selected, the
message "No item selected" is displayed to alert you to the
fact that you cannot make any changes.
4.
Press the [ENTER/SELECT] button to call up
the following display page:
5.
Rotate the [CURSOR÷VALUE] dial to select
the desired character, then use the TONE
buttons.
You can press the [NUMERIC] button to switch
between upper- and lower-case characters as well as
numbers. The [LWR] button can be used to delete the
selected character. The [UP2] button allows you to
insert a character.
6.
Rotate the [CURSOR÷VALUE] dial to select
the next character position you want to
change, then use the TONE buttons again.
7.
Repeat steps (5) and (6) above to complete
the name.
8.
Press the flashing [WRITE] button to con-
firm.

Delete

Files or folders on the connected USB memory that
you no longer need can be deleted as follows.
1.
Connect an optional USB memory to the
BK-5.
After a few seconds, the display shows the contents
of the USB memory.
Press the [USB MEMORY] button if you inserted the
USB memory at an earlier stage and now want to
return to this display page.