Table of Contents
Advertisement
Making Various Settings
Setting the MIDI Transmit Channel
Here's how to set the MIDI channel that the RG-1F/RG-3F will use
for transmission.
MIDI uses sixteen channels, numbered 1–16. When MIDI devices
are connected, sounds can be played or selected if the MIDI
channels of both devices match.
The RG-1F/RG-3F will receive all channels 1–16.
You can save this setting in the RG-1F/RG-3F's memory
using the Memory Backup function (p. 72).
1.
Press the [Piano Designer] button so the indicator is lit.
2.
Use the [▲] [▼] buttons to select "8. MIDI."
3.
Press the [Enter] button.
4.
Use the [▲] [▼] buttons to select "MIDI Tx Channel."
fig.d-MIDI-TxCh.eps
5.
Press the [+] or [–] button to set the MIDI Transmit
channel.
Value
Off, 1–16
6.
Press the [Piano Designer] button several times to make
the indicator go dark.
For details on connecting MIDI devices, refer to
"Connecting to MIDI Devices" (p. 77).
66
Sending Recorded Performance Data to a MIDI
Device (Composer MIDI Out)
If the "Composer MIDI Out" setting is "On," performance data
recorded on the RG-1F/RG-3F can be transmitted to a connected
MIDI device or computer.
You can save this setting in the RG-1F/RG-3F's memory
using the Memory Backup function (p. 72).
1.
Press the [Piano Designer] button so the indicator is lit.
2.
Use the [▲] [▼] buttons to select "8. MIDI."
3.
Press the [Enter] button.
4.
Use the [▲] [▼] buttons to select "Composer MIDI Out."
fig.d-MIDI-MIDIOut.eps
5.
Press the [+] or [–] button to switch the Composer MIDI
Out setting on or off.
Value
Description
The performance data recorded with the
On
RG-1F/RG-3F can be sent to the connected
MIDI device or computer.
The performance data recorded with the
Off
RG-1F/RG-3F cannot be sent to the connected
MIDI device or computer.
6.
Press the [Piano Designer] button several times to make
the indicator go dark.
Advertisement
Chapters
Table of Contents
