Adding Reverberation (Reverb); Adjusting The Reverb Depth - Roland RG-1F Owner's Manual

Playing

Adding Reverberation (Reverb)

You can add a pleasant reverberation to the sounds you play from the
keyboard, producing the impression that you're playing in a concert hall.
This effect is called "Reverb."
1
Press the [Reverb] button.
fig.Rev-Button.eps
The [Reverb] button will light; reverb will be applied to the sounds you play
from the keyboard.
To cancel the reverb effect, press the [Reverb] button once again so its
illumination is turned off.

Adjusting the Reverb Depth

1
Hold down the [Reverb] button and press the [+] or [–] button.
The screen will indicate the reverb depth setting.
fig.d-RevDepth.eps
Range
Higher values produce deeper reverb.
* You can't set the reverb depth individually for each tone. Each tone will have
the same reverb depth.
* The depth of the reverb applied to song playback will not change.
24
1–10
You can save this setting in
the RG-1F/RG-3F's memory
using the Memory Backup
function (p. 72).