Using A Pedal To Switch User Programs - Roland RG-1F Owner's Manual

User Program Registration

Using a Pedal to Switch User Programs

A pedal can be assigned the function of selecting among user programs. Once
the assignment is made, you can step on the pedal to cycle through the user
programs in numerical order, like this: 1, 2, 3, ... 36, then back to 1.
1
Press the [Piano Designer] button so its indicator is lit.
2
Use the [▲] [▼] buttons to select "6. User Program."
fig.d-PD6-UserProgram.eps
3
Press the [Enter] button.
4
Use the [▲] [▼] buttons to select "DEL."
fig.d-UP-del.eps
5
Press the [▼] button.
6
Use the [+] [–] buttons to select the pedal that you want to use to switch
user programs.
fig.d-UP-PShift.eps
Setting Description
Off A pedal will not be used to switch user programs.
The left pedal is dedicated to switching user programs. The function
Left
previously assigned to the left pedal will be unavailable.
The center pedal is dedicated to switching user programs. The function
Center
previously assigned to the center pedal will be unavailable.
7
Press the [Piano Designer] button a number of times until the indicator has
gone out.
Each time you press the pedal to which you assigned the function of switching
user programs, the user program will be switched.
42