Sec. 06; Sec. 07 - JUKI HZL-K85 Service Manual

SERVICE MANUAL
Presser foot height

SEC. 06

Checking
1. Lower the feed dog below the needle plate.
2. Raise the presser foot lever.
3. Check and see if clearance between needle plate and presser foot is
about 5.6 mm.
Adjustment
1. Remove the face cover, and raise the presser foot lever.
2. Loosen the screw (a) and adjust the presser foot height moving the presser bar.
3. Tighten the screw securely after checking the presser foot is parallel with
the holes for feed dog on the needle plate.
Date:
Page:
Model:
a
2011/09/23
23/39
K65&K85
6 mm