SERVICE MANUAL
Adjustment of feed-dog height
SEC. 03
Checking:
1. Set stitch length at zero feed.
2. Move feed dog to its highest position by turning hand wheel.
Check to see if feed dog height is as illustrated below.
Adjustment:
1. Remove needle plate. Remove bottom cover.
Adjust feed-dog with reference photo for vertical movement below.
Note: When turning screw, use driver only.
b
c
Viewing from back side.
0.9 – 1.1 mm
Mounting bracket of feed-dog
Date:
2011/09/23
Page:
17/39
Model:
K65&K85
d
e