Preparation Of The Sewing Machine; How To Operate The Sewing Machine Head; How To Attach The Needles; Thread Used - JUKI APW-896/IP-420 Instruction Manual

%. PREPARATION OF THE SEWING MACHINE

1. HOW TO OPERATE THE SEWING MACHINE HEAD

(1) How to attach the needles

CAUTION
:
• Turn OFF the power before starting the work so as to prevents accidents caused by abrupt start of
the sewing machine.
• When replacing the needle, be careful not to allow your fingers to touch the blade section of the
center knife.
2
2

(2) Thread used

Right hand twist thread
Left hand twist thread
Needles used are DP X 17 #14 to #18 (standard
#16). Use the specified needle.
Insert left- and right-hand sides needles as far as
1
they wll go pontng ther long grooves 1 at each
other and tghten needle clamp screws 2 .
• Use the left hand twist thread for the needle
thread.
• Either twist thread will do for the bobbin thread.
Use a new thread which is uniformly
twisted.
− 13 −