Advertisement
3
•
Turn the base assembly upright.
•
Fit the post into the base. Push to
"snap" the post in place. Pull up on the
post to be sure it's secure.
Hint: The post is designed to fit into the
base one way. If it does not seem to fit,
turn it around and try again.
4
•
Fit the tabs on the bracket into the slots
on the back of the backboard.
•
Push to
"snap" the bracket in place.
Assembly
Post
Backboard
Bracket
5
•
Slide the backboard assembly onto
the post.
3
Advertisement
