Table of Contents
Advertisement
5
FUNCTIONS FOR RECEIVE
■ RIT function
The RIT (Receive Increment Tuning) function com-
pensates for off-frequency operation of the received
station.
The function shifts the receive frequency up to
±9.99 kHz in 10 Hz steps*, without changing the trans-
mit frequency.
* The [RIT/∂TX] control tunes in 1 Hz steps when the operat-
ing frequency readout is set to the 1 Hz step readout.
q Push [RIT] to turn ON the RIT function.
• "RIT" and the frequency shift appear when this function
is ON.
w Rotate the [RIT/∂TX] control.
• Hold down [CLEAR] for 1 second to reset the RIT fre-
quency.
• Push [CLEAR] momentarily to reset the RIT frequency
when the "Quick RIT Clear" item is set to "ON" in the Set
mode. (p. 88)
• Hold down [RIT] for 1 second to add the frequency shift
to the operating frequency, if desired.
e To cancel the RIT function, push [RIT] again.
• "RIT" and the frequency shift disappear.
D RIT Monitor function
When the RIT function is ON, holding down [XFC] al-
lows you to listen to the displayed frequency (RIT is
temporarily cancelled).
53
Appear
M1
A G C
T B W
[XFC]
[RIT] [CLEAR]
[RIT/∂TX]
S C P
Advertisement
Table of Contents
