Table of Contents
Advertisement
12) Open the water supply line shut-off valve. Check for leaks.
13) Plug the unit back in. Move the power switch to the "ON" position and allow the
icemaker to run.
14) After 30 minutes, move the power switch to the "OFF" position. Unplug the unit.
15) Pour warm water into the storage bin to melt all of the ice, then clean the storage bin
liner, door liner, and door gasket with a neutral cleaner. Rinse thoroughly after cleaning.
16) Plug the unit back in. Move the power switch to the "ON" position to start the automatic
icemaking process.
53
Hide quick links:
Advertisement
Table of Contents
