Display Setting - Magnavox DP170MS8 Owner's Manual

B

DISPLAY Setting

You can change the display functions. Follow steps 1 to 3 in the "CUSTOM Menu" section on page 18.
4
Select the desired item.
or
DISPLAY menu
DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
PROGRESSIVE MODE AUTO1
OK FORMAT RGB
RGB RANGE NORMAL
5
PROGRESSIVE:
QUICK
(Default: OFF)
See note on the right.
4:3 LETTERBOX
TV ASPECT 4:3 LETTERBOX
AUTO
STILL MODE AUTO
ON
PROGRESSIVE OFF
AUTO 1
PROGRESSIVE MODE AUTO 1
RGB
FORMAT RGB
NORMAL
RGB RANGE NORMAL
OK
6
To complete the
"PROGRESSIVE"
setting
OK
5
TV ASPECT:
QUICK
(Default: 4:3 LETTER BOX)
See note on the right.
TV ASPECT
TV ASPECT 4:3 LETTERBOX
4:3 LETTER BOX
STILL MODE AUTO
4:3 PAN & SCAN
PROGRESSIVE OFF
16:9 WIDE
PROGRESSIVE MODE AUTO 1
16:9 SQUEEZE
FORMAT RGB
RGB RANGE NORMAL
OK
STILL MODE: (Default: AUTO)
See note on the right.
STILL MODE
TV ASPECT 4:3 LETTERBOX
AUTO
STILL MODE AUTO
FIELD
PROGRESSIVE OFF
FRAME
PROGRESSIVE MODE AUTO 1
FORMAT RGB
RGB RANGE NORMAL
OK
PROGRESSIVE MODE: (Default: AUTO1)
See note on the right.
PROGRESSIVE MODE
TV ASPECT 4:3 LETTERBOX
AUTO1
STILL MODE AUTO
AUTO2
PROGRESSIVE OFF
VIDEO
PROGRESSIVE MODE AUTO 1
FORMAT RGB
RGB RANGE NORMAL
OK
FORMAT: (Default: RGB)
See note on the right.
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE OFF
PROGRESSIVE MODE AUTO 1
FORMAT RGB
RGB RANGE NORMAL
OK
RGB RANGE: (Default: NORMAL)
See note on the right.
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE OFF
PROGRESSIVE MODE AUTO 1
FORMAT RGB
RGB RANGE NORMAL
OK
If "PROGRESSIVE" is "ON",
this message appears:
Before proceeding...
1. Make sure your TV has progressive scan.
2. Connect with component video cable
SETUP
NOTE: If there is no picture or picture is
A cti vate P rogre ssi ve?
SELECT: K / L
If there is no picture or you
do not press any buttons
for 15 seconds, Progressive
Scan will switch to "OFF".
Select "YES".
Confirm again to use progressive scan.
If Picture is good, Select "YES".
NO NO
YES YES
SET:OK
SELECT: K / L
– 19 –
Select the
desired
OK
setting.
or
Select the
desired
setting.
OK
or
Select the
desired
setting.
or
OK
4:3 LETTERBOX
AUTO
OFF
AUTO1
YCbCr
NORMAL
4:3 LETTERBOX
AUTO
OFF
AUTO1
RGB
ENHANCED
Select "YES".
distorted after selecting "YES",
wait about 15 seconds for auto recovery.
or
NO
YES
SET:OK
OK
or
6
To exit the menu
SETUP
Note:
TV ASPECT:
• Select "4:3 LETTER BOX", so
that black bars may appear
on the top and bottom of the
screen.
• Select "4:3 PAN & SCAN" for a
full height picture with both
sides adjusted.
• Select "16:9 WIDE" if a
wide-screen TV is connected to
this unit.
• Select "16:9 SQUEEZE" when
the TV screen is too large
horizontally at "16:9 WIDE"
setting and when it is possible
to adjust the screen size using
the TV's controls.
STILL MODE:
• Select "AUTO" usually.
• If you select "AUTO", it
automatically selects the best
resolution setting ("FRAME"
or "FIELD") based on the data
characteristics of the pictures.
(default)
• If you select "FIELD", the
picture in the still mode will be
stabilized.
• If you select "FRAME", the
picture in the still mode will be
highly defined.
• An individual picture on TV
screen is called a "frame",
which consists of two separate
images called as "field".
• Some pictures may be blurred
at the "AUTO" setting in the
still mode due to their data
characteristics.
PROGRESSIVE MODE:
• You can select a mode below
for the progressive scan
output.
• AUTO1: mode suitable for
images on the film
material.
• AUTO2: mode for images on
the material of 30-
frame film.
• VIDEO: mode for video
material.
FORMAT:
• Select an HDMI output mode
between "YCbCr" and "RGB".
• When the connected device
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
• This setting is effective only
when you use the HDMI
connection.
RGB RANGE:
• Select a HDMI picture mode
between "NORMAL" and
"ENHANCED".
• Select "ENHANCED" if the
black- white contrast is not
clear.
• This setting is effective only for
HDMI RGB output.
PROGRESSIVE:
• You can set "PROGRESSIVE"
to "OFF" either in "DISPLAY"
menu or by pressing and
holding [PLAY B] on the front
of the unit for more than 5
seconds.
• When "PROGRESSIVE" is "ON",
video signals from VIDEO OUT
and S-VIDEO OUT jacks will be
distorted or not be output at
all.
EN