Display Setting; Audio Setting - Magnavox MDV2300 Owner's Manual

B

DISPLAY Setting

You can change the display functions. Follow steps 1 to 2 on page 14.
3
Select the desired item.
ENTER
DISPLAY menu
DISPLAY_TV ASPECT
TV ASPECT 4:3 LETTER BOX
STILL MODE 4:3 PAN & SCAN
PROGRESSIVE 16:9 WIDE
Note:
TV ASPECT:
• Select "4:3 LETTER BOX", so that
black bars may appear on the top y y
and bottom of the screen.
• Select "4:3 PAN & SCAN" for a full
height picture with both sides
adjusted.
• Select "16:9 WIDE" if a wide-screen
TV is connected to this unit.
STILL MODE:
• Select "AUTO" usually.
• If you select "AUTO", it automatically y y
selects the best resolution setting
("FRAME" or "FIELD") based on the data
characteristics of the pictures. (default)
• If you select "FIELD", the picture in y y
the still mode will be stabilized.
• If you select "FRAME", the picture in y y
the still mode will be highly defined.
• An individual picture on TV screen
is called a "frame", which consists of
two separate images called as "field".
• Some pictures may be blurred if y y
y y you select "AUTO" in the still mode
due to their date characteristics.
C

AUDIO Setting

Choose the appropriate audio settings for your device. It only affects during the playback of DVD. Follow steps 1 to 2 on page 14.
3
Select the desired item.
ENTER
AUDIO menu
AUDIO_DRC
DRC ON
DOWN SAMPLING OFF
DOLBY DIGITAL
TV ASPECT: (Default: 4:3 LETTER BOX)
See note on the left.
DISPLAY_TV ASPECT
TV ASPECT 4:3 LETTER BOX
STILL MODE 4:3 PAN & SCAN
PROGRESSIVE 16:9 WIDE
ENTER ENTER ENTER
(Default: AUTO)
See note on the left.
DISPLAY_STILL MODE
TV ASPECT AUTO
STILL MODE FIELD
PROGRESSIVE FRAME
ENTER ENTER ENTER
PROGRESSIVE: (Default: OFF)
See note on the right.
DISPLAY_PROGRESSIVE
TV ASPECT OFF
STILL MODE ON
PROGRESSIVE
ENTER ENTER ENTER
Before proceeding...
1. Make sure your TV has progressive scan.
2. Connect with component video cable
If there is no picture or
NOTE: If there is no picture or picture is
you do not press any
Act i va te Pr og r essi ve?
buttons for 15 seconds, SELECT: K / L
"PROGRESSIVE" will
switch to "OFF" and it
will exit the "SETUP"
menu.
Confirm again to use progressive scan.
If Picture is good, select 'YES'.
SELECT: K / L
DRC (Dynamic Range Control): (Default: ON)
Set to "ON" to compress the range between soft and loud sounds.
AUDIO_DRC
DRC ON
DOWN SAMPLING OFF
DOLBY DIGITAL
ENTER ENTER ENTER
DOWN SAMPLING: (Default: ON)
Set to "ON" when outputting in 48kHz.
Set to "OFF" when outputting the original sound.
AUDIO_DOWN SAMPLING
DRC ON
DOWN SAMPLING OFF
DOLBY DIGITAL
ENTER ENTER ENTER
DOLBY DIGITAL: (Default: BITSTREAM)
Set to "BITSTREAM" when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs a Dolby Digital signals.
• PCM: convert the Dolby Digital into PCM (2 channel).
AUDIO_DOLBY DIGITAL
DRC BITSTREAM
DOWN SAMPLING PCM
DOLBY DIGITAL
ENTER ENTER ENTER
– 15 –
Select the
desired
setting.
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
ENTER
Select the
desired
setting.
AUTO
FIELD
FRAME
ENTER
Select
"ON".
OFF
ON ENTER
Select "Yes".
distorted after selecting 'YES',
wait about 15 seconds for auto recovery.
NO
YES
SET:ENTER
ENTER ENTER ENTER
Select "Yes".
NO NO
YES YES
SET:ENTER
Select the
desired
setting.
ON
OFF
ENTER
Select the
desired
setting.
ON
OFF
ENTER
Select the
desired
BITSTREAM
PCM
setting.
ENTER
5
To exit
"TV ASPECT" or
"STILL MODE"
ENTER ENTER ENTER
menu
SETUP
To complete
"PROGRESSIVE"
setting
ENTER ENTER ENTER
ENTER ENTER ENTER
SETUP
Note:
PROGRESSIVE:
• You can set
"PROGRESSIVE" to
"OFF" in "DISPLAY"
menu or press and
hold [PLAY B] on the
front of the unit for
ENTER
more than 5 seconds
during playback, so
that the P- SCAN
indicator on the front
panel turns off.
• When "PROGRESSIVE"
is "ON", video signals
from the unit's VIDEO
ENTER
OUT and S-VIDEO OUT
jacks will be distorted
or not be output at all.
5
To exit the menu
SETUP
ENTER ENTER
Note:
DRC:
• This function is
available only on
the discs which are
recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing back
ENTER ENTER
disc with copyright
protection, the sound
will be down sampled
at 48kHz, even if you
set to "OFF".
ENTER ENTER ENTER
EN