Display Setting; Video Setting - Magnavox MDV3110 Owner's Manual

B

Display Setting

You can change the display functions. Follow steps 1 to 2 on page 15.
3
Select the desired item.
ENTER
Display menu
Angle Icon
Language
Screen Saver
Display
Video
Audio
Others
C

Video Setting

You can change the video functions. Follow steps 1 to 2 on page 15.
3
Select the desired item.
ENTER
Video menu
Language TV Aspect
Progressive
Display
Video
Audio
Others
EN
4
Angle Icon: (Default: On)
See note on the right.
Angle Icon Angle Icon
Language
Screen Saver Screen Saver
Display
Video
Screen Saver: (Default: On)
See note on the right.
Angle Icon Angle Icon
Language
Screen Saver Screen Saver
Display
Video
4
TV Aspect: (Default: 16:9 Wide)
Sets the aspect ratio of the playback
image to fit your TV.
Language TV Aspect TV Aspect
Progressive Progressive
Display
Video
Audio
Progressive: (Default: Off)
Changing "Progressive" setting is not
available while HDMI cable is connected.
TV Aspect TV Aspect
Language
Progressive Progressive
Display
Video
Audio
Before proceeding...
Make sure your TV supports the selected item.
Connect with component video cable.
If there is no picture
NOTE: If a blank screen appears, wait for 15 seconds
for auto-recovery.
or you do not press
Activate?
any buttons for 15
Progressive
seconds, "Progressive"
Select: K / L
will switch to "Off"
and it will exit the
setup menu.
– 16 –
Select the
desired
On
setting.
Off
Select the
desired
setting.
On
Off
Select the
desired
16:9 Wide
setting.
4:3 Letter Box
4:3 Pan & Scan
Select
"On".
On
Off
Select "Yes".
Yes
On
No
Set:ENTER
5
To exit the menu
Note:
Angle Icon:
• Set to "On" to display
when multiple camera
angles are available
during DVD playback.
Screen Saver:
• Sets whether to
activate the screen
saver after 5 minutes of
no action on the unit.
5
To exit
"TV Aspect" menu
To complete
"Progressive"
setting
Note:
TV Aspect:
• Select "16:9 Wide"
if a wide-screen TV is
connected to this unit.
• Select "4:3 Letter Box",
so that black bars may
appear on the top
and bottom of the TV
screen.
• Select "4:3 Pan & Scan"
for a full height picture
with both sides adjusted.
Progressive:
• You can set
"Progressive" to "Off"
in "Video" menu or
press and hold
[ PLAY B ] on the
front of the unit for
more than 5 seconds
during playback.
• When "Progressive"
is "On", video signals
from the unit's VIDEO
OUT and S-VIDEO OUT
jacks will be distorted
or not be output at all.