Connecting To Powerware 9350; Figure 18. Battery Connections For A Powerware 9350 - Powerware 9350 Installation Manual

This chapter will explain how to electrically connect your battery cabinets to
your Powerware 9350---80 or 160 UPS.
Figure 18 details the Battery cabinet DC connections and control wiring connection
point in a Powerware 9350---80 UPS. Figure 19 details the same connections in a
Powerware 9350---160 UPS.
NOTE: See Table C in Appendix A for sizing wire for separate battery configurations.
There are no battery cabinet-to-UPS mechanical attachment requirements for this
type of system. However, individual battery cabinets should be attached and
grounded to each other. Please refer to later sections of this chapter for
instructions on these procedures.
Powerware 9350 Series 685 and 1085 Auxiliary Battery Cabinets
Installation Manual 164201408 Rev. P00 053002
Powerware 9350 ---80 and 160

Figure 18. Battery Connections for a Powerware 9350---80

Connecting to
CUSTTB terminal block
for control wiring.
Mounted to inside top of
cabinet.
DC INPUT
from battery
to UPS
(E4, E5)
29